Индустриален комутатор Ethernet Remote I/O, 6 цифрови входни канала + 6 релейни канала

Moxa’s ioLogik E2200 Series Ethernet Remote I/O is a PC-based data acquisition and control device that uses proactive, event-based reporting to control I/O devices and features the Click&Go programming interface. Unlike traditional PLCs, which are passive and must poll for data, Moxa’s ioLogik E2200 Series will, when paired with our MX-AOPC UA Server, communicate with SCADA systems using active messaging that is pushed to the server only when state changes or configured events occur. Additionally, the ioLogik E2200 features SNMP for communications and control using an NMS (Network Management System), allowing IT professionals to configure the device to push I/O status reports according to configured specifications. This report-by-exception approach, which is new to PC-based monitoring, requires far less bandwidth than traditional polling methods.

PC-Free Alarm and Control Intelligence

This device supports simple yet powerful Click&Go™ technology to configure event-driven reports and alarms delivered over email, TCP/UDP, or SNMP traps, giving you a powerful and effective tool for delivering timestamped status updates in real time.

With built-in Click&Go™ intelligence, this device can be configured for simple outputs paired up with simple input triggers without the need for a PC controller. This allows it to be configured to automatically report I/O events according to conditions specified by the user.

SNMP for Ethernet Device Management

By using SNMP, IT engineers can configure the device to deliver alarms (traps) for specific I/O events, or use it to read or write directly to the I/O registers. For the strongest security, the device features SNMPv3, with authentication and encryption. With Moxa’s SNMP-capable I/O, even IT professionals can easily integrate industrial sensors and servos over an Ethernet backbone, and with its strong network management tools, it is ideal for a wide variety of industrial applications, including environmental monitoring, telecommunications, power production and delivery, and transportation.

Push Technology for Events and Alarms

When used with MX-AOPC UA Server, devices can use active push communications when communicating changes in state and/or events to a SCADA system. Unlike a polling system, when using a push architecture for communications with a SCADA system, messages will only be delivered when changes in state or configured events occur, resulting in higher accuracy and lower amounts of data that need to be transferred.

Control Logic

• Language: Click&Go

Input/ Output Interface

• Digital Input Channels: 6
• Relay Channels: 6
• Buttons: Reset button
• Rotary Switch: 0 to 9
• Isolation: 3k VDC or 2k Vrms

Digital Inputs

• Connector: Screw-fastened Euroblock terminal
• Sensor Type: Dry contact, Wet contact (NPN or PNP)
• I/O Mode: DI or event counter
• Dry Contact: On (short to GND), Off (open)
• Wet Contact (DI to GND): On (0 to 3 VDC), Off (10 to 30 VDC)
• Counter Frequency: 900 Hz
• Digital Filtering Time Interval: Software configurable
• Points per COM: 3 channels

Relays

• Connector: Screw-fastened Euroblock terminal
• Type: Form A (N.O.) power relay
• I/O Mode: Relay or pulse output
• Pulse Output Frequency: 0.3 Hz at rated load
• Contact Current Rating: Inductive load: 2 A @ 30 VDC, 250 VAC, 110 VAC, Resistive load: 5 A @ 30 VDC, 250 VAC, 110 VAC
• Minimum Permitted Load: 1 A @ 5 VDC
• Contact Resistance: 100 milli-ohms (max.)
• Electrical Endurance: 100.000 operations @ 5 A resistive load
• Mechanical Endurance: 1.000.000 operations
• Note: Ambient humidity must be non-condensing and remain between 5 and 95%. The relays may malfunction when operating in high condensation environments below 0°C.

LED Interface

• LED Indicators: PWR, RDY, Serial, I/O Status

Ethernet Interface

• 10/100BaseT(X) Ports (RJ45 connector): 1
• Magnetic Isolation Protection: 1.5 kV (built-in)

Ethernet Software Features

• Configuration Options: Windows Utility (ioAdmin), Web Console (HTTP)
• Industrial Protocols: Modbus TCP Server (Slave), SNMPv1/v2c/v3, SNMPv1 Trap, Moxa AOPC (Active Tag), MXIO Library, CGI commands
• Management: BOOTP, IPv4, SMTP, DHCP Client, HTTP, TCP/IP
• MIB: Device Settings MIB
• Time Management: SNTP

Security Functions

• Authentication: Local database
• Encryption: HMAC
• Security Protocols: SNMPv3

Modbus TCP

• Functions Supported: 1, 2, 3, 4, 5, 6, 15, 16
• Mode: Server (Slave)

Serial Interface

• Connector: Terminal block
• Serial Standards: RS-485
• No. of Ports: 1
• Baud rate: 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200 bps
• Parity: None
• Data Bits: 8
• Stop Bits: 1
• Flow Control: None

Serial Signals

• RS-485-2w: Data+, Data-, GND

Serial Software Features

• Industrial Protocols: Modbus RTU Master

Platform

• Real-time Clock (RTC): Real-time clock with battery backup

Power Parameters

• Power Connector: Screw-fastened Euroblock terminal
• No. of Power Inputs: 1
• Input Voltage: 12 to 36 VDC
• Power Consumption: 170 mA @ 24 VDC

Physical Characteristics

• Dimensions: 115 x 79 x 45.6 mm
• Weight: 250 g
• Installation: DIN-rail mounting, Wall mounting
• Wiring: I/O cable, 16 to 26 AWG, Power cable, 16 to 26 AWG
• Housing: Plastic

Environmental Limits

• Operating Temperature: -10 to 60°C (14 to 140°F)
• Storage Temperature (package included): -40 to 85°C (-40 to 185°F)
• Ambient Relative Humidity: 5 to 95% (non-condensing)
• Altitude: 2000 m 

Standards and Certifications

• Safety: UL 508
• EMC: EN 61000-6-2/-6-4
• EMI: CISPR 32, FCC Part 15B Class A
• EMS: IEC 61000-4-2 ESD: Contact: 4 kV; Air: 8 kV, IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m, IEC 61000-4-4 EFT: Power: 2 kV; Signal: 1 kV, IEC 61000-4-5 Surge: Power: 1 kV, IEC 61000-4-6 CS: 10 V, IEC 61000-4-8 PFMF
• Shock: IEC 60068-2-27
• Vibration: IEC 60068-2-6
• Freefall: IEC 60068-2-32

Declaration

• Green Product: RoHS, CRoHS, WEEE

MTBF

• Time: 307.239 hrs
• Standards: Telcordia SR332