10 ports PoE switch, 8x100M PoE + 2x1G + SFP

Rating:
SKU
P110GH

Stonet P110GH is a 10 Ports standard POE switch that provides 8 FE POE ports, 2 Gigabit Up-link ports and 1 SFP fiber port. Ports 1~8 features POE power supply capability and can be used as Power over Ethernet devices. The power supply port can automatically detect and recognize the powered device that complies with the IEEE 802.3af/at standard and supply power through the network cable. 2 Gigabit uplink ports ensure a smooth transmission for NVR or up-link routers. P110GH is a most economical solution for HD security network.

BGN 107.88 BGN 89.90
BGN 107.88 BGN 89.90
In stock

Features

  • Supporting 802.3, 802.u Faster Ethernet, IEEE 802.3ab 1000BASE-T
  • Supports POE IEEE 802.3af/at compliant Powered Device (PD)
  • Modes: Normal switch mode/Extended mode (Port1-8: 250 meters ultra-long transmission)
  • Ports 1~8 features POE power supply capability and can be used as Power over Ethernet devices;2x10/100/1000Base-T Uplink and 1x1000Base-X SFP
  • Support full duplex based on IEEE802.3x and half duplex based on Backpressure
  • Auto MDI/MDIX crossover for all ports
  • Support non-blocking wire speed forwarding
  • MAC address auto-learning & auto-aging
  • Steel case, the total POE power budget of 100W
  • Just Plug and Play

Specifications

  • Interface: 8x10/100Mbps POE ports (Data/Power); 2x10/100/1000M uplink RJ45 ports (Data)
  • Mode: Normal switch mode/Extend mode
  • Data Transfer Rate: Ethernet: 10Mbps (Half-duplex); 20Mbps (Full-duplex); Fast Ethernet: 100Mbps (Half-duplex); 200Mbps (Full-duplex); Gigabit Ethernet: 2000Mbps (Full-duplex)
  • Power Input POE Standards: Single port maximum power 30W, Whole switch maximum power 100W; Support over-current, over-voltage and short-circuit protection; Support Soft Start of High Power PD; Support sequential boot-up; Power Supply Pin: 12+/36-; AC 110~240V 50/60HZ
  • Cabling type: 100Base-TX: Cat 5e or better UTP/STP (≤100 m); 10Base-TX: Cat 5e or better UTP/STP (≤250 m)
  • Dimensions (L x W x H ): 190 x 140 x 43 mm
  • Operation Temperature: 0℃~40℃
  • Storage Temperature: -40℃~70℃
  • Operation Humidity: 10%~90% RH Non-condensing
  • Storage Humidity: 5%~90% RH Non-condensing
More Information
Weight, kg0.000000
BrandSTONET
ColorBlack
Country of ManufactureChina
Lan Ports Type10/100 Mb/s RJ45, 10/100/1000 Mb/s RJ45
Lan Ports Number10
Fiber optical portsSFP
Number of Fiber Optical Ports1
Optical ports speed100 Mb/s, 1 Gb/s
PoEYES
PoE StandardIEEE 802.3af 15.4W PoE, IEEE 802.3at 30W PoE+
Used for:Commercial
Switch ManagementUnmanaged
Form FactorDesktop
Write Your Own Review
You're reviewing:10 ports PoE switch, 8x100M PoE + 2x1G + SFP