Industrial Switch 8*10/100/1000Base-T PoE + 2*1000Base-X SFP

Rating:
SKU
DK3110I-8TP2S

The DPTEK DK3110I-8TP2S are the unmanaged industrial grade PoE switches with 8-port 10/100/1000-T PoE and 2-port 1000Base-X fiber optical interfaces. They comply with IEEE802.3af, IEEE802.3at standard PoE protocol, the Max power consumption can reach 30W (PoE+) per port. Moreover, they are also featuring with port isolation, 250m long distance transmission mode(1-4 ports), QoS(1-2 ports) and PoE watchdog function, which all can be configured by the Dip switch on the top panel.

DK3110I-8TP2S series are also high cost-effective easy-to-use devices, which provide essential industrial Ethernet networking function, such as wide range power input 44-57VDC, redundant power design with polarity reverse/over-voltage protection, robust IP40 fan-less housing with Din-rail installation, wide operation temperature from -40°C to 75°C as well as high-level EMI/EMC capability and so on. They are the best choice for heavy industrial factory, transportation, oil & gas, chemical, IP Surveillance and processing automation area where environmental conditions exceed commercial product specifications.

BGN 287.88 BGN 239.90
BGN 287.88 BGN 239.90
In stock

Features:

➢ 8*10/100/1000Base-T RJ45 PoE ports, 2*1000Base-X SFP (/SC/ST/FC optional) ports

➢ DC 44~57V input, redundant power supply with polarity reverse/over-voltage protection

➢ Complies with IEEE802.3af PoE and IEEE802.3at PoE+ standard

➢  Dip switch function: 1.Port isolation; 2. 250m long distance; 3. QoS; 4.PoE watchdog

➢ Support 10K Bytes Jumbo frame

➢ Support 4KV surge protection and ESD: Air-15kV, Contact-8kV Protection

➢ IP40 fan-less and Din-rail hardware design

➢ Operation temperature: -40°C~+75°C

Specifications:

Interface

Fiber ports: 2

Copper RJ45 ports: 4

Ethernet

8*10/100/1000Base-T PoE

2*1000Base-X SFP(SC/ST/FC optional)

Standard

IEEE 802.3 Ethernet

IEEE 802.3u Fast Ethernet

IEEE 802.3ab Gigabit Ethernet

IEEE 802.3x Full-Duplex Flow Control

IEEE 802.3az Energy Efficient Ethernet

IEEE 802.3af Power-over-Ethernet

IEEE 802.3at Power-Over-Ethernet Plus PSE

Dip Switch

1. Port Isolation

2. 250m long distance mode(1-4 ports)

3. QoS(1-2 ports)

4. PoE watchdog

Power parameters

Input voltage: 44-57VDC, redundant power input

Input current: 5.6A Max

Total consumption: Full loading without PoE ≤7.5W; PoE power budget ≤240W

Connector: Removable 4-pin terminal block

Reverse polarity protection: Support

Over-voltage protection: Support

Switching features

Switching capacity: 20G

Packet forwarding rate: 29.7 Mpps

MAC address table: 16K

VLAN: 4K

Buffer: 2M

Forwarding delay: <5us

Jumbo Frame: Support 10Kbytes

MDX/MIDX: Support

Watchdog: Support

Network Topology

Star topology: Support

Bus topology: Support

Tree Topology: Support

Mechanical structure

Case protection: IP40

Installation method: Din-rail

Dimension(W*D*H)mm: 48*98*130mm

Weight: 0.72 kg

Operating environment

Operating temperature: -40℃~+75℃

Storage/transportation temperature: -40℃~+85℃

Relative humidity: 5%~95% (non-condensing)

Industry standard: 

Surge protection of power: IEC 61000-4-5  Level 3 (4KV/2KV)(8/20us)

Surge protection of Ethernet ports: IEC 61000-4-5  Level 3 (4KV/2KV)(10/700us))

DIP: IEC 61000-4-11  Level 3(10V)

ESD: IEC 61000-4-2  Level 4(8K/15K)

Shock: IEC 60068-2-27

Free fall: IEC 60068-2-32

Vibration: IEC 60068-2-6

Certification: CE/FCC/RoHS

More Information
Weight, kg0.830000
BrandDPTEK
Country of ManufactureChina
Lan Ports Type10/100/1000 Mb/s RJ45
Lan Ports Number8
Fiber optical portsSFP
Number of Fiber Optical Ports2
Optical ports speed1 Gb/s
PoEYES
PoE StandardIEEE 802.3af 15.4W PoE, IEEE 802.3at 30W PoE+
Used for:Industrial
Switch ManagementUnmanaged
Form FactorDin Rail
EAN6977182780348
Write Your Own Review
You're reviewing:Industrial Switch 8*10/100/1000Base-T PoE + 2*1000Base-X SFP